Ready ! Edimax EW-7209APg : 400mw
Posted by bukan.apa.apa pada Juni 1, 2009
harga : Rp 599.000
klik gambar untuk perbesar
– bandwith management (pembatasan pemakaian bandwith untukclient)
IEEE-802.11g Wireless LAN Access Point + 5 Ports 10/100M Switch
- Complies with the IEEE 802.11g/b Standards
- Supports AP, Station, Bridge, WDS and Universal Repeater Modes
- Supports WEP, WPA and WPA2 Encryption
- Supports Radius Server with EAP-MD5 Authentication
- Detachable RPSMA Antenna
- Built-in 5-port 10/100Mbps Switch
FEATURES AND TECHNICAL SPECIFICATIONS
Complies with the IEEE 802.11g/b 2.4GHz specification
Supports 2.400~2.4835 GHz frequency band, 1~14 channels
High data rate up to 54Mbps network speed
Auto rate fallback in case of obstacles or interferences
Supports point-to-point and point-to-multi point bridge function
Supports WDS (Wireless Distributed System) repeater mode
Supports roaming link integrity
Supports authentication for wireless connectivity based on ESSID
Provides 64/128 bit key length WEP data encryption
Supports WPA, WPA2 security enhanced function (pre-shared key, 802.1x, TKIP, AES …)
Provides MAC access control and hidden SSID function
Provides RADIUS server with EAP-MD5/PEAP authentication function
Provides DHCP server
Supports Web-based configuration, firmware upgradeable via Web
Provides RP-SMA detachable antenna that can be easily replaced by an high-gain outdoor antenna
||CPU, SWITCH & RF
RP-SMA Detachable Antenna
LED indicators: Power, LAN Link/Activity, Wireless Activity
CPU: Realtek RTL8186
Switch: Realtek RTL8305SC (5 Port Switch)
RF: Realtek RTL8225
- 12V DC, 0.4A Switch Power Adaptor
Quick installation Guide
2 MB NOR Flash
16 MB SDRAM
||HUMIDITY & TEMPERATURE
64/128-bit WEP, WPA and WPA2
10/100M UTP Port x 1
Max. 10~90% (Non Condensing)
30(H) x 187(W) x 100(D) mm
NETWORK SETUP DIAGRAM AND RELATED PRODUCTS
An example of how the EW-7209APg can be setup:
• Connect the access point to ADSL modem, router, or switch/hub in your network through the LAN port of the access point by Ethernet cable.
• Connect a computer to the LAN port and setup the Internet connection by running the multi-language setup wizard.
• Connect wireless devices to EW-7209APg.
||IEEE 802.11g/b Wireless LAN Access Point
Acting as a bridge between the wired Ethernet and the 2.4GHz IEEE 802.11g/b wireless LAN, this wireless LAN access point can let your wireless LAN client stations access both the wired and the wireless network nodes.
Universal Repeater Mode
The Universal Repeater function can extend the coverage and signal strength for the current wireless environment. It is compatible with other wireless APs and Routers. Users can use this feature to build up a large wireless network in a huge space like airports, hotels and schools…etc.
Station Mode (AP Client Mode)
You can connect EW-7209APg to a network device’s Ethernet port and enable Station mode. It turn easily this wired network device to a wireless one without changing any configuration.
Robust Wireless Security
Beside the basic security control by ESSID and 64/128 bit key length WEP encryption, this access point also supports the advanced security features, like MAC access control, IEEE 802.1x authentication, TKIP, AES and hidden ESSID. It provides a total solution for you to build up a secure wireless network environment that can prevent from hacker intrusion.
Built-in 5-Port 10/100Mbps Switch
EW-7209APg builds in 5-port 10/100Mbps switch. You don’t need a separate switch when you plan to connect the wired and wireless network. EW-7209APg saves the cost and makes the network easy.
You can configure this access point through the friendly Web user interface with a browser.